- This article only applies to multi-unit Apollo configurations using Console 2.0 under Mac OS X where the total number of available inputs or outputs (analog, digital, virtual, etc) exceed 64 channels each.
- Prior to v9.0, the "I/O Matrix" panel is labeled as the "Core Audio" panel. I/O Matrix panel settings in this article also apply to Core Audio prior to UAD v9.0.
As of version 2020.6, Pro Tools limits your total number of inputs and outputs to 64 channels each when using third party non-Avid hardware. If you are using multiple Apollo units in a multi-unit configuration, your total potential number of input and output channels may exceed 64.
Older versions of Pro Tools limit your total number of inputs and outputs to 32 channels each when using third party non-Avid hardware. If you are using an Apollo 16 or multiple Apollo units in a multi-unit configuration, your total potential number of input and output channels will exceed 32.
How can we work around this?
First, head to the I/O Matrix panel in the Console Settings window (Console > Settings > I/O Matrix). You will need to manually reassign the channels you want to access in Pro Tools so that they fall within either the first 64 or the first 32 channels in both the input and output columns, depending on how new your version of Pro Tools is. Typically, Apollo users will sacrifice either Virtual or Digital (S/PDIF, ADAT, or AES/EBU) inputs and outputs to make sure all of the Apollo's analog inputs and outputs can be used in Pro Tools when using multi-unit configurations.
How do we achieve this?
If you are using an original (silver) Apollo or Apollo 16 with an older version of Pro Tools, you can select one of the I/O presets already available that matches your configuration which will limit your input and output channels to 32 automatically. For example, if you’re using two Apollo (silver) units, select the “Multi-Apollo PT Legacy” preset from the I/O Preset menu. If using two Apollo 16 (silver) units, select “Multi-A16 PT Legacy”. Once you have selected the appropriate I/O preset for your system, proceed to resetting the Pro Tools I/O as described below.
If you're using a multi-unit configuration with a newer version of Pro Tools, you will need to manually configure the I/O on the I/O Matrix panel in Console Settings. First, change both the "# Inputs" and "# Outputs" options to 64 using the fields at the top right of the I/O Matrix panel
If you're using an Apollo 8, Apollo 8p, or Apollo 16 mkII with an older version of Pro Tools, you will need to manually configure the Apollo's I/O on the I/O Matrix panel in Console Settings. First, change both the "# Inputs" and "# Outputs" options to "32 (PT Mode)" using the fields at the top right of the I/O Matrix panel.
Setting "# Inputs" and "# Outputs" to "32 (PT Mode)" on the I/O Matrix panel
Now, if any inputs or outputs that you need to use were cut off by limiting the I/O to 64 or 32 channels, you will need to manually reassign those inputs or outputs within the first 64/32 channels. First, click anywhere on the input channel you want to reassign. Select the device, followed by the channel type, followed by the input (see below). Please note that there is no “done” or “apply” button – simply click the “x” to close the window after making your assignment.
Selecting and reassigning an input channel
If there are multiple channels in a row that you want to reassign in sequence, you can use the Cascade switch to save time. Manually reassign the first channel you want to change, click the Cascade switch, then click, hold, and drag down from that channel. Release on the last channel you want to reassign. All of the channels you just dragged over will be reassigned in sequence starting from the first one you clicked on. Click the Cascade switch again to exit this mode. See the Console Settings chapter in the Apollo Software Manual for details on using the Cascade switch.
Using Cascade to reassign input channels in sequence
Repeat this process for all input and output channels that you want to reassign.
Selecting and reassigning an output channel
Using Cascade to reassign input channels in sequence
Once complete, you can save this setup as an I/O Preset for easy recall and switching by clicking the "Save" button at the top of the I/O Matrix panel. If you switch between DAWs, you will probably want to have an alternate setup saved that uses all possible inputs and outputs for when you are not using Pro Tools (most DAWs do not limit you to 64/32 channels of I/O as Pro Tools does).
The last step is to reset your Pro Tools I/O to reflect any changes you made on the I/O Matrix panel. Follow the directions below to reset your Pro Tools I/O:
- You will first need to make sure that the Apollo is selected as your Playback Engine within Pro Tools. To do this, open Pro Tools and navigate to Setup > Playback Engine and make sure 'Universal Audio Apollo' is selected.
- Next, navigate to Setup > I/O and click on the 'Input' tab when the I/O Settings window appears.
- On the 'Input' tab, select all paths shown and click 'Delete Path'. Delete all paths on this tab so it is completely empty.
- Once all paths are deleted, click the 'Default' button. This will re-populate the tab with the correct paths.
- Repeat these steps for the 'Output', 'Bus' and 'Insert' tabs as well.