UAD-2 Satellite FireWire Power Supply Specifications & Purchase Info

It is highly recommended to always use the original power supply that came with your UAD-2 Satellite FireWire or a factory replacement. However, if your power supply fails or is lost and you need to get through a session, you can use a generic replacement power supply that matches the original power supply's specifications as a temporary solution.

Important: Universal Audio is not responsible for any damage caused by using a non-factory power supply.

Here's what you'll need to consider when picking up a generic replacement power supply for your UAD-2 Satellite FireWire:

  • Make sure that the replacement power supply matches the specifications of the original power supply exactly. Do not use a replacement power supply that does not provide the correct output voltage or current, or does not match the polarity of the original.
  • The exact specifications of the UAD-2 Satellite FireWire power supply are:

Output: 12VDC
Current Draw: 1250mA
Polarity: Center Positive
Barrel dimensions (diameter): 5.5 mm (outside), 2.1 mm (inside)

  • Make sure that the replacement power supply fits snugly into the power connector on the back of the unit.

If you'd like to order a factory replacement power supply for your Satellite FireWire online, please see the links from our authorized retailers below:

Sweetwater (US)
Satellite FireWire Power Supply

Alto Music (US)
Satellite FireWire Power Supply

Thomann (EU)
Satellite FireWire Power Supply

Factory replacement power supplies can also be ordered directly from Universal Audio by contacting Customer Support.

Articles in this section