Network Panel

Apollo x16D Network Settings

Network settings for Dante network Apollo devices are included on the Network panel. For the most part, these settings are informational. 

 

Network Interface

This displays the network interface which your computer uses to connect to the Dante network. connected.

Dante Network Settings

The Dante Network Settings row shows information about the network settings for all connected Apollo x16D devices. These network settings are also displayed in Dante Controller. All fields in this display are read-only, except Reset. 

Reset

If you need to reset your network settings for an Apollo x16D, click Reset. When you tap the Reset button, a warning appears that audio will be interrupted. All network settings are reset after you click OK. 

Tip: For example, if the IP address of your x16D has been set to a static IP address that you don't know, you can reset the network settings. 

Articles in this section

See more