UAD Plug-Ins

Welcome to UA Support
How can we help?

UAFX Control Mobile App Manual

UAFX Control is the companion software for UAFX pedals. To get UAFX Control software, go here.

UAFX Control Mobile App – The UAFX Control mobile app is for registration, getting free bonus effects and speaker cabinets, global settings such as footswitch modes, and preset management.

UAFX Control Desktop App – The UAFX Control desktop app is for pedal registration, getting free bonus effects and speaker cabinets, and firmware updates. Firmware updates for UAFX may be provided to improve or add functionality, and are installed over a USB connection to a computer, using a USB-C cable (not included). For the UAFX Control Desktop App Manual, go here.

This article includes:

 


 

Installing the UAFX Control Mobile App

iOS

Search for and install “UAFX Control” from the App Store, or go here for direct links.

Important: When you open UAFX Control for the first time, iOS prompts you to allow Bluetooth. You must tap OK and allow Bluetooth to use UAFX Control. If you don’t, UAFX Control cannot connect to your UAFX pedals. To manually allow the app to use Bluetooth (if you choose Don’t Allow when prompted), open the Settings app, choose UAFX Control from the list, and enable Bluetooth.

uafx-control-mobile-allow-bluetooth.png

Android

Search for and install “UAFX Control” from the Google Play Store, or go here for direct links.

Important: When Android prompts you to access the device’s location, you must allow the device location. If you deny the location, UAFX Control cannot use Bluetooth, and will not be able to connect to your UAFX pedals.

Android Device Location Notes

  • Device location is an Android requirement that allows an app to use Bluetooth. Universal Audio does not use UAFX Control to track location in any way.
  • If you deny app access to the device location, you will need to remove and reinstall the app.
  • Your Android device may present a different dialog to allow location information.

allow-location-android.png

 


 

Logging in and Connecting to your UAFX Pedals

  1. Confirm your UAFX pedal is powered on.
  2. Open UAFX Control on your mobile phone. The Log In screen appears.
    login.png

  3. Log in to your UA account, or create a new account if you don’t already have one. The app screen opens, and any unpaired UAFX pedals in range appear.
    pedal-found.PNG

  4. Tap the tile for a UAFX pedal to open its configuration screen. The Bluetooth pairing request appears on your screen.
    bt-pairing-request.PNG

  5. Accept the pairing request to pair your phone with the UAFX pedal.

After the UAFX pedal is paired

  • If the pedal is not registered to your account, the pedal registration screen opens. See [Registering your UAFX Pedal] below.
  • If the pedal is already registered to your account, its presets screen opens.

Note: You may be prompted to pair your pedal with Bluetooth again if you update the pedal’s firmware using the UAFX Control desktop app.

 

Logging out of UAFX Control Mobile

If you log out of UAFX Control mobile, the app removes your pedals. If you log back in to the app, tap Add New at upper left of the app and press the Pair button on the pedal to reconnect.

Log out of UAFX Control mobile

  • At the top of the UAFX Control mobile app screen, tap ••• and tap Log Out.

img:uafx-logout

uafx-logout.png

UAFX Control returns to the Log In screen.

 


 

Registering your UAFX Pedal

If your pedal is not registered to your UA account, you can register it with UAFX Control.

Note: Any time the pedal is registered, the bonus effect(s) or speaker cabinets are added to your pedal. If the pedal is subsequently registered by a different user, registration is transferred automatically.

Tap the pedal tile on the home screen to open your pedal’s configuration. The tile animates while the app connects, and the Register Pedal screen appears if the pedal is not currently registered to your UA account.

register-pedal.png

Tap the Register Pedal button to register your UAFX pedal. After the pedal is registered, the app shows the Registration Complete screen and information about how to select the bonus effect(s) or speaker cabinets. Tap OK to see the pedal’s User presets screen.

Note: Descriptions of each pedal’s bonus effects or speaker cabinets, and how they are accessed, are provided in the individual pedal descriptions below.

 


 

Using UAFX Control

Note: Global settings and preset management in this section of the manual apply to all UAFX pedals. 4-cable mode settings apply only to amplifier emulation pedals (Dream '65, Ruby '63, Woodrow '55). Settings that are unique to individual pedals are described later in this guide.

presets-settings-tap.png

Presets screen

The pedal’s User Presets screen is displayed after registration. The User Presets screen shows every preset you have stored on your UAFX pedal. If you do not have any user presets stored, the screen shows you how to add one. If the app is on the Settings screen, tap the Presets area at the bottom left of the pedal's main screen to open the Presets screen.

Settings screen

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

starlight-settings-presets-screen.png

Settings and preset screens (Starlight)

 


 

Managing Presets

The UAFX Control mobile app allows you to view, audition, and manage the presets on your pedal. In addition to the UA factory and artist presets that are added to your pedal by the app, every user preset on the pedal can be recalled and managed. Presets you select in the app are moved to the preset slot on your pedal so they can be heard.

Note: Individual presets you see in the app are stored on the pedal, not in the UAFX Control mobile app. To store a preset, you must hold down the Store toggle switch on the pedal.

To enter the preset management screen, first tap your pedal’s tile on the app’s initial view. If the app is in Settings view, tap the Presets area at the bottom left of the pedal’s main screen to switch into Presets view.

preset-management-overview.png

Important Notes

  • Pedal presets - Individual presets you see in the app are stored on the pedal, not in the app. If UAFX Control is disconnected from your mobile device, or if you delete the app, all presets remain on the pedal.
  • Pedal backups - Backups created in the mobile app are stored in the app, not on the pedal. If UAFX Control is deleted from your mobile device, the preset backups in the app are permanently lost.

Factory and artist presets

The first time you connect your pedal to UAFX Control, the app installs UA factory and artist presets onto the pedal. The factory and artist presets are read-only and cannot be modified, but after loading an artist or factory preset, you can adjust the pedal’s settings, then store it (using the pedal’s Store switch) as your own user preset.

Special features in factory and artist presets

Some factory and artist presets include features that are not accessible with the pedal controls. These features may include speaker cabinets, microphones, room changes, and effect configurations. These presets can also include custom control mappings, so knobs and switches might not work as expected.

To see a description of each factory or artist preset and any custom settings, tap ••• to view preset info.

preset-custom-description.png

You can edit a custom factory or artist preset and save it as your own preset by holding down the pedal’s Store switch to make use of these custom settings. You can also save a copy from the preset info overlay, then edit the sound with the knobs and switches, and save it on the pedal by holding down the Store switch.

To configure a new sound with available, non-custom sounds and knob settings, switch to Live mode and save a new preset.

Viewing and selecting presets

To view and select presets, tap a category at the top of the screen (User, Factory, Artist, or Favorite).

  • User includes all presets you have stored on the pedal. Note that there are no User presets until you store them.
  • Factory includes presets made by UA sound designers as useful tonal starting points.
  • Artist includes presets made by select UA artists.
  • Favorite includes presets that you have swiped as favorites. Note that there are no Favorite presets until you favorite them.

To select a preset and load it into the Preset slot on the pedal, tap on a preset. The preset is immediately loaded and you can play through it to hear the sound.

Note: If the pedal is in Live mode when a preset is loaded, the pedal switches to Preset mode. If the pedal is bypassed, the pedal is unbypassed by the app.

To favorite a preset

Swipe a preset to the right to make it a favorite. To unfavorite a preset, swipe the preset to the right again. The preset is starred when it is a favorite.

Tip: You can also favorite a preset by opening preset options, then tapping Favorite.

presets-favorite-unfavorite.png

To delete a preset

  • Swipe to the left to delete a User preset, then tap the X.

preset-swipe-delete.png

To store a preset

To store a sound as a preset on the pedal, hold down the Store toggle switch on the pedal until the Preset LED blinks rapidly.

Preset options

  • Tap ••• next to the active preset to open the preset options.
    preset-edit-dots.png
    preset-edit.png
  • To change the name of the preset, tap the pencil next to the name, and type the name for the preset, then tap Save. Note that factory and artist presets cannot be renamed.
  • To favorite or unfavorite a preset, tap Favorite or Unfavorite.
  • After you load a preset, you can edit it by changing the knob and switch settings. When a preset has been changed, the EDITED label appears next to the name in the preset list.
    preset-edited.png
  • To save the preset, hold down the pedal’s Store switch until the Preset LED blinks rapidly. The preset is saved with a generic name (for example, “Dream 5”) to the User presets list.
  • To save a copy of the preset, tap Save A Copy. A preset with the same name, and “Copy” appended, is saved to the top of the User list.
  • To delete a preset tap Delete, then tap Confirm Delete when prompted. You can also swipe a user preset in the User and Favorite lists to the left to delete. Note that factory and artist presets cannot be individually deleted.
  • Deleted user presets can be restored using the app’s backup/restore features.

Preset Notes

  • You can only save a new preset to a pedal by holding down the Store switch on the pedal, until the Preset LED blinks rapidly.
  • The following global settings can make presets on your UAFX pedal appear as edited, if the global settings are different than when the preset was saved:
    • 4-cable mode (Dream '65, Ruby '63, Woodrow '55)
    • Preamp coloration mode on/off (Starlight)
    • Tap tempo on/off (Astra, Starlight)

Presets Backup

Presets Backup retrieves all user presets from the UAFX pedal and saves them as a single batch in the UAFX Control app. You might want to do this before you reset your pedal or before you delete presets to maintain a copy of the current state of your presets. The backup is retained in the app even after you reset your pedal, so you can restore presets at a later time.

Important: If you delete the UAFX Control app from your mobile device, your backups are permanently lost.

To back up your presets

  1. At the bottom of the UAFX Control mobile app, tap Settings.
  2. Scroll down if needed, then tap Save New Backup.
    backup-save.png

The backup is stored in the UAFX Control mobile app.

Updating the backup

You can update the backup before you apply a firmware update or reset your pedal, or after you have changed presets (storing, adding, deleting, and renaming) and you want to replace your backup to store the current state of your pedal presets.

Important: When you update the backup, the pedal’s previously saved backup in the app is overwritten and permanently lost.

To update your backup

  1. Tap Update Backup.
    backup-after-backup.png
  2. In the warning dialog, tap Update.
    update-backup-warning.png

The backup in UAFX Control is replaced with the presets from the pedal.

Restore Backup

When you restore a backup from the app to the pedal, you have the option to either Replace Presets or Merge Presets.

  • Replace Presets – All presets on the pedal are deleted and replaced with all presets in the backup.
    Important: User presets on the pedal that are not in the UAFX Control backup are permanently lost
  • Merge Presets – All presets in the UAFX Control backup are added to the presets on the pedal. Note that merge can result in duplicate user presets, because presets with the same name are added and not replaced.

To restore your presets

  1. In the Preset Backups section, tap Restore. The Restore options appear.
    backup-restore-info.png
  2. Tap Replace Presets or Merge Presets.

The presets are restored to the pedal.

 

Viewing and restoring presets from another pedal

If you connect two pedals of the same type to UAFX Control on the same mobile device, and save backups from both pedals in the app, UAFX Control allows you to restore the User presets from one pedal to another.

To restore presets from another pedal

  1. In the Preset Backups section, tap the pedal backup from which you want to restore.
    backup-from-another-pedal.png
  2. Tap Restore. The Restore options appear.
    backup-restore-info.png
  3. Tap Replace Presets or Merge Presets.

The presets are restored to the pedal.

 


 

Managing Pedal Settings

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Renaming a pedal

You can type a custom name for your pedal. This name appears in the pedal’s tile in the UAFX Control mobile app and in the device’s Bluetooth settings so you can easily identify your pedal.

Tap the pencil to the right of the name to edit the pedal name. Tap done when you have typed the name.

rename-pedal.png

Removing a pedal

You can remove a pedal from the tile display in the UAFX Control mobile app. Removing a pedal does not delete any information on the pedal, remove the registration, or change any Bluetooth settings.

To remove a pedal from UAFX Control:

  1. Swipe the pedal tile to the left. The red Remove area appears.
  2. Tap Remove to delete the pedal from the UAFX Control mobile app.

remove-a-pedal.png

Adding a previously removed pedal

When a pedal has been removed, you can add it back to the UAFX Control mobile app.

To add a previously removed pedal:

  1. Press the PAIR button on the back of the UAFX pedal once.
  2. Tap the Add New button in UAFX Control.
    add-pedal.png

The pedal tile appears in UAFX Control.
uafx-home-screen.png

Getting Context Help

You can get contextual help in UAFX Control by tapping the ⓘ symbol next to a section. The context help is built into the app and doesn’t require an internet connection.

context-help.png

Getting Online Help

To access the UAFX pedal manuals and get other details such as individual effect control maps, tap the Online Help button at the bottom of the screen to visit the UAFX Knowledge Base. Online help requires an internet connection.

online-help.png

Resetting your UAFX Pedal

Reset your pedal to restore your UAFX pedal to the factory defaults.

Important Notes:

  • You must remove the pedal tile from UAFX control, and remove the pedal from your phone’s Bluetooth settings if you want to reconnect your mobile device after you reset the pedal defaults.
  • Resetting your pedal deletes any user presets, bonus speaker cabinets, bonus effect(s), and registration. Customized preset settings are permanently lost. (You can backup and restore your presets after you reset the pedal).
  • To get the bonus speaker cabinets or bonus effect(s) after resetting the pedal, register the pedal again with UAFX Control software.

To reset the pedal:

  1. Tap the Reset Pedal button at the bottom of the UAFX Control screen.
    reset-pedal-button.png

    reset-pedal.png
  2. Read the warnings, then tap Reset Pedal to continue. The pedal restarts.
  3. Remove the pedal tile from the UAFX Control mobile app.
  4. Remove the pedal from your phone’s Bluetooth settings.

 


 

Live/Preset Switch

You can choose to listen to the preset sound or the live sound with the app, instead of using the pedal’s footswitch. After you use the app to change to any footswitch mode except the default Live | Preset mode (in any mode that requires the pedal sound to be always on), you can choose whether the Live sound or the Preset sound is active.

Assigning the preset or live sound

At the bottom of the app, tap the Live/Preset buttons to switch between the live and preset sounds. Your choice will persist on the pedal until you switch to another sound, either with a footswitch on the pedal or with this switch in the app.

uafx-control-live-preset-slider.png

Important: This setting is retained when the pedal is powered off. This means that, when the active footswitch mode doesn’t allow switching between Live and Preset modes:

  • You won’t be able to switch between Live mode and Preset mode without the mobile app, and
  • You won’t be able to tell by looking at the pedal whether you’re in Live mode or Preset mode.

This circumstance applies to Ruby '63 and Dream '65 in the following modes:

  • Boost | Vibrato (Dream '65, Ruby '63)
  • Reverb | Vibrato (Dream '65)
  • Reverb | Boost (Dream '65)

Example 1

The footswitch mode is set to Boost | Vibrato and the app’s Live/Preset switch is set to Preset when the pedal is powered off. When the pedal is powered back on: the stored preset loads, the pedal is in Preset mode, and you can’t switch to Live mode without the app. This example allows your favorite sound (the stored preset) to always load as soon as the pedal is powered, but controls may not match the sound initially.

Example 2

The footswitch mode is set to Boost | Vibrato and the app’s Live/Preset switch is set to Live when the pedal is powered off. When the pedal is powered back on: the pedal is in Live mode, and you can’t switch to Preset mode without the app. This example ensures your knob and switch settings are heard when initially powered, but you can’t load the stored preset without the app.

Tip: To retain the ability to switch between Live mode and Preset mode without the app, set the footswitch mode to one of these values before powering off:

  • Live | Preset
  • Boost | Live/Preset
  • Vibrato | Live/Preset
  • Reverb | Live/Preset

 


 

4-Cable Mode (UAFX amp emulators only)

4-cable mode with Dream '65, Ruby '63, and Woodrow '55 amp pedals let you add another switchable channel to any real guitar amplifier that has an effects loop. This special mode lets you switch between your guitar amplifier’s built-in preamp section and the sounds in your pedal.

Warning: Turn off your amplifier before wiring the pedal and enabling 4-cable mode. If you enable 4-cable mode with incorrect wiring, you can cause extreme feedback.

How 4-cable mode works

  • When a UAFX amp pedal is on, the amp emulation is heard, and the real amp’s preamp section is bypassed.
  • When a UAFX amp pedal is off, the real amp’s preamp section is heard, and the pedal is bypassed with analog dry-through.

4-cable mode notes

  • 4-cable mode is only available on UAFX amp pedals (Dream '65, Ruby '63, and Woodrow '55).
  • If the pedal is not already in Live | Preset mode when you enable 4-cable mode, a confirmation appears, and the pedal automatically switches switches to Live | Preset mode after you confirm.
  • When you’re playing through a real guitar amplifier and speaker cabinet, you might want to disable the pedal’s speaker cabinet emulation by pressing the pedal's Speaker switch until its LED is unlit.
  • You may need to adjust the UAFX pedal’s Output knob lower than you normally would, because the effects loop return on your amp is unattenuated.
  • If you are using other pedals in your effects loop, place them between the first UAFX amp pedal’s 2/Stereo output and the Return input on your amp’s effects loop. With this wiring, the other pedals in the effects loop still process audio, even when the pedals are bypassed.
  • Front-of-amplifier effects, such as distortion and overdrive pedals, should be placed between the instrument and the first pedal’s 1/Mono input.
  • On Ruby '63 and Woodrow '55, the Room control does not have any effect in 4-cable mode.

Multiple UAFX amp pedals

To use multiple UAFX amp pedals in 4-cable mode, see the examples below. With multiple pedals configured in 4-cable mode, you can switch between preset and live sounds on the amp pedals and the sounds in your real amplifier for even more available sounds. When you use multiple amp pedals in 4-cable mode, the earliest amp pedal enabled in the chain is the amp pedal you hear.

Tip: To switch between sounds on different UAFX amp pedals with multiple pedals in 4-cable mode, enable sounds on multiple pedals. The first pedal that is enabled is the pedal you hear. When you bypass a pedal that is earlier than another enabled pedal, you will hear the next enabled pedal. In this way you can switch between sounds on multiple pedals.

To enable 4-cable mode

  1. Power off your real amplifier.
  2. Configure the cables as illustrated and described below.
  3. Connect to the pedal with the UAFX Control mobile app, and open the pedal Settings screen.
  4. In the UAFX Control mobile app, under 4-Cable Mode, tap On. A confirmation is displayed.
  5. Tap Enable 4-Cable Mode in UAFX Control mobile. The pedal enters 4-cable mode.
  6. Turn your amplifier on.

You can now hear the UAFX amp pedal when Live mode or Preset mode is enabled, and your real amplifier’s preamp channel when the pedal is disabled.

4-cable mode connections

See the diagrams and sections below for 4-cable mode connections with one, two, or three UAFX amp pedals.

One UAFX amp pedal

Use 4-cable mode with one UAFX amp pedal to add another switchable channel to your real effects-loop equipped guitar amplifier.

  1. Connect your instrument to the 1/Mono input on your UAFX amp pedal.
  2. Connect the 1/Mono output from the UAFX amp pedal to the main input on your amplifier.
  3. Connect the effects loop Send output on your amplifier to the 2/Stereo input on your UAFX amp pedal.
  4. Connect the 2/Stereo output from the pedal to the effects loop Return input on your amplifier.
  5. Place any front-of-amplifier effects between your instrument and the UAFX amp pedal, and place any other effects loop effects between the pedal’s 2/Stereo output and the effects loop return input on your amplifier.

UAFX amp pedal enabled

This diagram shows the signal flow when the UAFX amp pedal is enabled. Your signal is colored with the full amp tone from the pedal and routed to your real amplifier’s effects loop return, bypassing your real amplifier’s input jack and preamplifier section. Any effects placed in your amplifier’s effects loop return are heard.

4-Cable-Active-Diagram.png

UAFX amp pedal bypassed

This diagram shows the signal flow when the UAFX amp pedal is bypassed. Note that your signal passes through the pedal with no pedal amp tone, and into the main input on your real amplifier. Any effects placed before your amplifier’s effects loop return are heard.

4-Cable-Bypass-Diagram.png

Two UAFX amp pedals

To connect two UAFX amp pedals in 4-cable mode, you need a total of six cables. Wire the pedals as described and shown in the diagram below. In this mode, the earliest enabled UAFX amp pedal is the one you hear, even when the other UAFX amp pedal is enabled. Looking at your pedals from the top, this would be the UAFX amp pedal furthest to the right. Any effects placed before your amplifier’s effects loop return are heard.

  1. Connect your instrument to the 1/Mono input on your first UAFX amp pedal.
  2. Connect the 1/Mono output from the first pedal to the 1/Mono input on the second pedal.
  3. Connect the 2/Stereo output from the first pedal to the effects loop Return input on your amplifier.
  4. Connect the 1/Mono output from the second pedal to the main input on your amplifier.
  5. Connect the 2/Stereo output from the second pedal to the 2/Stereo input on the first pedal.
  6. Connect the effects loop Send output on your amplifier to the 2/Stereo input on the second pedal.
  7. Place any front-of-amplifier effects between your instrument and the first UAFX amp pedal, and place any other effects loop effects between the first pedal’s 2/Stereo output and the effects loop return input on your amplifier.

6-Cable-Diagram.png

Three UAFX amp pedals

To connect three UAFX amp pedals in 4-cable mode, you need a total of eight cables. Wire the pedals as described and shown in the diagram below. In this mode, the earliest enabled pedal is the one you hear, even when one or both of the other two pedals are enabled. Looking at your pedals from the top, this would be the pedal furthest to the right. Any effects placed before your amplifier’s effects loop return are heard.

  1. Connect your instrument to the 1/Mono input on your first UAFX amp pedal.
  2. Connect the 1/Mono output from the first pedal to the 1/Mono input on the second pedal.
  3. Connect the 1/Mono output from the second pedal to the 1/Mono input on the third pedal.
  4. Connect the 2/Stereo output from the first pedal to the effects loop Return input on your amplifier.
  5. Connect the 2/Stereo output from the second pedal to the 2/Stereo input on the first pedal.
  6. Connect the 2/Stereo output from the third pedal to the 2/Stereo input on the second pedal.
  7. Connect the 1/Mono output from the third pedal to the main input on your amplifier.
  8. Connect the effects loop Send output on your amplifier to the 2/Stereo input on the third pedal.
  9. Place any front-of-amplifier effects between your instrument and the first UAFX amp pedal, and place any other effects loop effects between the first pedal’s 2/Stereo output and the effects loop return input on your amplifier.

8-Cable-Diagram.png

 


 

Astra Settings

With the UAFX Control mobile app, you can change how Astra behaves when bypassed, and what the right footswitch does.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Astra bonus effects

After registration the Phaser X90 and Dharma Trem 61 effects are added to the pedal. To select these effects, push the Effect Type switch until the top or middle LED is lit green.

astra-select-leds.png

Configuring Bypass Routing

Astra Modulation Machine effect bypass routing can be set for true bypass or buffered bypass. Bypass routing determines how the pedal behaves when the effect is off.

For additional details about why you might want to use these routing modes, see this article.

To set Astra for true bypass or buffered bypass

Under Bypass Routing, tap True Bypass or Buffered Bypass.

 

True Bypass

tbp-astra.png

When bypass routing is set for true bypass and the effect is off, the dry signal is pure analog dry-through from input to output, without buffering or any other circuitry, via mechanical relays. By default, your UAFX pedal is set for true bypass.

When set for true bypass and the effect is on, the output is buffered.

 

Buffered Bypass

bbp-astra.png

When bypass routing is set for buffered bypass, the output is buffered when the effect is on, and also when the effect is off.

When the effect is off, the dry signal remains analog dry-through.

 

Configuring the Right Footswitch

The behaviors of the right footswitch can be changed to suit your preferences. Note that the left footswitch always toggles Live mode, where the knobs and switches are “what you see is what you hear” (except the speed knob, if tempo is tapped).

Astra’s right footswitch has two available settings:

Preset*

Live mode and Preset mode are available. Tap tempo is unavailable.

Preset + Tap

Live mode, Preset mode, and Tap Tempo for both modes are available.

*Default setting from factory and after restoring defaults

To set the right footswitch for Preset or Preset + Tap mode

Under Right footswitch, tap Preset or Preset + Tap.

Preset

astra-fs-preset.png

When set to Preset, the right footswitch immediately loads the preset with its stored tempo, and toggles the preset on/off. Tap tempo is unavailable with this setting.

Preset + Tap

astra-fs-preset-tap.png

When set to Preset + Tap, the right footswitch performs multiple functions.

Load Preset: Hold the right footswitch for 1.5 seconds (or longer) to load the preset with its stored tempo when the footswitch is released. The Effect Type LED blinks rapidly when the preset is armed for loading.

Bypass Preset: Hold the right footswitch for 1.5 seconds (or longer) to bypass the preset when the footswitch is released. The Effect Type LED blinks rapidly when the preset is armed for bypass. Tip: Tap the left footswitch twice to quickly bypass the pedal from Preset mode.

Tap Live/Preset Tempos: Tap (don’t hold) the right footswitch twice or more to tap quarter note tempo. In Live mode, the right footswitch LED blinks red at the current tempo. In Preset mode, the right footswitch LED blinks green at the current tempo.

 


 

Dream '65 Settings

With the UAFX Control mobile app, you can change the operation of your pedal and your pedal’s footswitches for your amplifier setup and performance preferences.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Dream '65 bonus speaker cabinets

After registration, the Boutique D65, S-Verb, and JBF120 speaker cabinets are added to the pedal. To select these speaker cabinets, push the Effect Type switch until the top, middle, or bottom LED is lit green.

bonus-cabs-dream.png

Dream '65 footswitch modes

Footswitch modes can be changed to suit your preferences. Using the UAFX Control mobile app, you can configure the switches to toggle live mode and preset mode, toggle your amp’s preamp and the pedal’s preamp in 4-cable mode, and toggle boost, vibrato, or reverb features in almost any combination.

Choosing a footswitch mode

To select a footswitch mode, open the Settings screen. Then tap the current footswitch mode (colored bar) and choose a mode from the drop menu.

Note: See Assigning the preset or live sound for information about how to set the pedal sound when you use a footswitch mode that cannot be bypassed.

footswitch-modes-dream.png

The following Dream '65 footswitch modes can be selected with the UAFX Control mobile app.

Live | Preset

dream-fs-live-preset.png

In Live | Preset mode, you can access Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles the Live sound on/off
  • Right Footswitch toggles the stored Preset on/off
  • Pedal can be bypassed
  • 4-cable mode is available

Boost | Live/Preset

dream-fs-boost-live-preset.png

In Boost | Live/Preset mode, you can switch Boost on and off, and toggle between Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles Boost on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed
  • 4-cable mode is not available

Vibrato | Live/Preset

dream-fs-vibrato-live-preset.png

  • Left Footswitch toggles Vibrato on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed
  • 4-cable mode is not available
  • As with the original mod, vibrato is enabled only when D-Tex boost is Off

Boost | Vibrato

dream-fs-boost-vibrato.png

  • Left Footswitch toggles Boost on/off
  • Right Footswitch toggles Vibrato on/off
  • Sound is Live mode (knobs and switches) or preset mode, selected separately
  • Pedal is always on and cannot be bypassed
  • As with the original mod, vibrato is enabled only when D-Tex boost is Off

Reverb | Live/Preset

dream-fs-reverb-live-preset.png

  • Left Footswitch toggles Reverb on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed

Reverb | Vibrato

dream-fs-reverb-vibrato.png

  • Left Footswitch toggles Reverb on/off
  • Right Footswitch toggles Vibrato on/off
  • Sound is Live mode (knobs and switches) or preset mode, selected separately
  • Pedal is always on and cannot be bypassed
  • As with the original mod, vibrato is enabled only when D-Tex boost is Off

Reverb | Boost

dream-fs-reverb-boost.png

  • Left Footswitch toggles Reverb on/off
  • Right Footswitch toggles Boost on/off
  • Sound is Live mode (knobs and switches) or preset mode, selected separately
  • Pedal is always on and cannot be bypassed

 


 

Golden Settings

With the UAFX Control mobile app, you can change how Golden behaves when bypassed.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Golden bonus effect

After registration, the Chamber & Plate 224 reverb is added to the pedal. To select this effect, push the Effect Type switch until the top LED is lit green.

golden-select-leds.png

Configuring Bypass Routing

Golden Reverberator effect bypass routing can be set for true or trails bypass. Bypass routing determines how the pedal behaves when the effect is off.

For additional details about why you might want to use these routing modes, see this article.

To set Golden for true bypass or trails bypass

Under Bypass Routing, tap True Bypass or Trails Bypass.

True Bypass

tbp-golden.png

When bypass routing is set for true bypass and the effect is off, the dry signal is pure analog dry-through from input to output, without buffering or any other circuitry, via mechanical relays. By default, your UAFX pedal is set for true bypass.

When bypass routing is set for true bypass and the effect is on, the dry signal remains analog dry-through and the output is buffered.

Trails Bypass

bbp-golden.png

When bypass routing is set for trails bypass and the effect is off, the effect plays out naturally, rather than stopping suddenly.

The dry signal remains analog dry-through when the effect is on and off, and the output is always buffered.

 


 

Ruby '63 Settings

With the UAFX Control mobile app, you can change the operation of your pedal and your pedal’s footswitches for your amplifier setup and performance preferences.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Ruby '63 bonus speaker cabinets

After registration, the Blue Mod, Match, and Gold speaker cabinets are added to the pedal. To select these speaker cabinets, push the Effect Type switch until the top, middle, or bottom LED is lit green.

bonus-cabs-ruby.png

Ruby '63 footswitch modes

Footswitch modes can be changed to suit your preferences. Using the UAFX Control mobile app, you can configure the switches to toggle live mode and preset mode, toggle between your amp’s preamp and the pedal’s preamp in 4-cable mode, and to toggle boost and vibrato features in almost any combination.

Choosing a footswitch mode

To select a footswitch mode, open the Settings screen. Then tap the current footswitch mode (colored bar) and choose a mode from the drop menu.

Note: See Assigning the preset or live sound for information about how to set the pedal sound when you use a footswitch mode that cannot be bypassed.

footswitch-modes-ruby.png

The following Ruby '63 footswitch modes can be selected with the UAFX Control mobile app.

Live | Preset

ruby-fs-live-preset.png

In Live | Preset mode, you can access Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles the Live sound on/off
  • Right Footswitch toggles the stored preset on/off
  • Pedal can be bypassed
  • 4-cable mode is available

Boost | Live/Preset

ruby-fs-boost-live-preset.png

In Boost | Live/Preset mode, you can switch Boost on and off, and toggle between Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles Boost on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed

Vibrato | Live/Preset

ruby-fs-vibrato-live-preset.png

  • Left Footswitch toggles the Vibrato on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed

Boost | Vibrato

ruby-fs-boost-vibrato.png

  • Left Footswitch toggles Boost on/off
  • Right Footswitch toggles the Vibrato on/off
  • Sound is Live mode (knobs and switches) or preset mode, selected separately
  • Pedal is always on and cannot be bypassed

 


 

Starlight Settings

With the UAFX Control mobile app, you can change how Starlight behaves when bypassed, what the right footswitch does, and preamp coloration on the dry signal.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Starlight bonus effect

After registration, the Cooper Time Cube delay is added to the pedal. To select this effect, push the Effect Type switch until the top LED is lit green.

starlight-select-leds.png

 

Configuring Bypass Routing

Starlight Echo Station effect bypass routing can be set for true or trails bypass. Bypass routing determines how the pedal behaves when the effect is off.

For additional details about why you might want to use these routing modes, see this article.

To set Starlight for true bypass or trails bypass

Under Bypass Routing, tap True Bypass or Trails Bypass.

True Bypass

tbp-starlight.png

When bypass routing is set for true bypass and the effect is off, the dry signal is pure analog dry-through from input to output, without buffering or any other circuitry, via mechanical relays. By default, your UAFX pedal is set for true bypass.

When set for true bypass and the effect is on, the dry signal remains analog dry-through (except when preamp coloration is enabled) and the output is buffered.

Trails Bypass

bbp-starlight.png

When bypass routing is set for trails bypass and the effect is off, delays play out naturally, rather than stopping suddenly.

The dry signal remains analog dry-through when the effect is on and off (except when preamp coloration is enabled), and the output is always buffered.

Preamp Coloration

Starlight Echo Station includes the preamp tone of the Tape EP-III and Analog DMM on the wet signal. The meticulously modeled preamps in these effects are renowned for their smoothness, warmth, and musicality. Preamp coloration can also be enabled on the dry signal with these effects.

Preamp coloration behavior depends on the bypass routing setting. Preamp coloration is unavailable with the Precision and Cooper Time Cube effects.

To turn preamp coloration on or off

Under Preamp Coloration, tap Off or On to enable or disable preamp coloration on the dry signal.

preamp-coloration.png

Preamp Coloration Off

starlight-tbp-preamp-on.png

When preamp coloration is off, the dry signal is always uncolored and analog dry-through when the delay effect is on, and also when the delay effect is off, with both true bypass and trails bypass routings.

Preamp Coloration On (True Bypass)

starlight-tbp-preamp-off.png

When preamp coloration is on and bypass routing is set for true bypass, the dry signal is preamp colored when the delay effect is on, but uncolored analog dry-through when the delay effect is off.

Preamp Coloration On (Trails Bypass)

starlight-trails-preamp-on.png

When preamp coloration is on and bypass routing is set for trails bypass, the dry signal is preamp colored when the delay effect is on, and also when the delay effect is off.

Preamp Coloration Notes

  • If the pedal is set for preamp coloration with trails bypass, the preamp coloration of the Live mode effect is heard when the effect is bypassed.
  • If the pedal is set for preamp coloration with trails bypass, there are no delay trails with the Analog DMM effect. This matches the behavior of the original hardware, which does not have trails when bypassed.

Configuring the Right Footswitch

The behaviors of the right footswitch can be changed to suit your preferences. Note that the left footswitch always toggles Live mode, where the knobs and switches are “what you see is what you hear” (except the delay time knob, if tempo is tapped).

Starlight’s right footswitch has three available settings:

Preset + Tap*

Live mode, Preset mode, and Tap Tempo for both modes are available.

Preset

Live mode and Preset mode are available. Tap tempo is unavailable.

Tap Tempo

Live mode and Tap Tempo are available. The preset is unavailable.

*Default setting from factory and after restoring defaults

To set the right footswitch for Preset + Tap, Tap Tempo, or Preset

Under Right Footswitch, tap Preset, Tap Tempo, or Preset + Tap.

Preset + Tap

starlight-fs-preset-tap.png

When set to Preset + Tap, the right footswitch performs multiple functions.

Load Preset: Hold the right footswitch for 1.5 seconds (or longer) to load the preset with its stored tempo when the footswitch is released. The Effect Type LED blinks rapidly when the preset is armed for loading.

Bypass Preset: Hold the right footswitch for 1.5 seconds (or longer) to bypass the preset when the footswitch is released. The Effect Type LED blinks rapidly when the preset is armed for bypass. Tip: Tap the left footswitch twice to quickly bypass the pedal from Preset mode.

Tap Live/Preset Tempos: Tap (don’t hold) the right footswitch twice or more to tap quarter note tempo. In Live mode, the right footswitch LED blinks red at the current tempo. In Preset mode, the right footswitch LED blinks green at the current tempo.

Tap Tempo

starlight-fs-tap.png

When set to tap tempo, the right footswitch taps quarter note tempo for Live mode only. The right footswitch LED blinks red at the current tempo. Although you cannot access the stored preset in this mode, its settings remain intact.

Preset

starlight-fs-preset.png

When set to preset, the right footswitch immediately loads the preset with its stored tempo, and toggles the preset on/off. Tap tempo is unavailable with this setting.

 


 

Woodrow '55 Settings

With the UAFX Control mobile app, you can change the operation of your pedal and your pedal’s footswitches for your amplifier setup and performance preferences.

Tap Settings at the bottom right of the screen to access the settings for a pedal. You may need to scroll down on this screen to see all available settings.

Woodrow '55 bonus speaker cabinets

After registration, the Vee30, B-Man, and JB120 speaker cabinets are added to the pedal. To select these speaker cabinets, push the Effect Type switch until the top, middle, or bottom LED is lit green.

bonus-cabs-woodrow.png

Woodrow '55 footswitch modes

Footswitch modes can be changed to suit your preferences. Using the UAFX Control mobile app, you can configure the switches to toggle live mode and preset mode, toggle between your amp’s preamp and the pedal’s preamp in 4-cable mode, and to toggle the boost on and off.

Choosing a footswitch mode

To select a footswitch mode, open the Settings screen. Then tap the current footswitch mode (colored bar) and choose a mode from the drop menu.

Note: See Assigning the preset or live sound for information about how to set the pedal sound when you use a footswitch mode that cannot be bypassed.

footswitch-modes-woodrow.png

The following Woodrow '55 footswitch modes can be selected with the UAFX Control mobile app.

Live | Preset

woodrow-fs-live-preset.png

In Live | Preset mode, you can access Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles the Live sound on/off
  • Right Footswitch toggles the stored preset on/off
  • Pedal can be bypassed
  • 4-cable mode is available

Boost | Live/Preset

woodrow-fs-boost-live-preset.png

In Boost | Live/Preset mode, you can switch Boost on and off, and toggle between Live mode (knobs and switches) and the stored preset.

  • Left Footswitch toggles Boost on/off
  • Right Footswitch toggles between Live mode (red LED) and the stored preset (green LED)
  • Pedal is always on and cannot be bypassed
  • 4-cable mode is not available
Have more questions? Submit a request

Comments