How to Install and Authorize Splice INSTRUMENT

This article demonstrates how to install and authorize the Splice INSTRUMENT included with your purchase of a Volt interface.

1. Install UA Connect and register your Volt interface, if you have not already done so. More information on this topic can be found in this article.
    
2. Within UA Connect, click the Volt Interfaces tab.
    

3. Scroll down to the UA Partner Software section, and click on Splice INSTRUMENT.
    

   

   
    

4. In the Redeem Software window, click the Download button. This will redirect you to the Splice website.
    

   

   
    

5. Create a Splice account or log in if you already have one.
    
6. Download the appropriate Splice INSTRUMENT installer for your operating system.
    
7. On macOS, navigate to your Downloads folder and double-click the DMG installer.
   On Windows, right-click the zipped file that was downloaded and select Extract All, then double-click the installer inside the folder that was extracted.
    
8. Run the installer and follow the on-screen steps.
    
9. Open your DAW and load the Splice INSTRUMENT plug-in onto a track.