USB Connection Info for Windows

This article shows information regarding USB connections on Windows with UA Devices such as Apollo USB, Satellite USB, and Volt.

Note: The info in this article pertains to Windows computers. Before proceeding, please ensure your computer meets the system requirements of your UA device.


USB Cables

Choosing an appropriate USB cable is critical to ensure stable connectivity with UA devices.

For Apollo USB and Satellite USB models, see this article: Apollo and Satellite Data Cable Guide

For Volt interfaces, see this article: Volt Data Cable Guide
 

Connecting to the Computer

Connect directly into the computer. Avoid connecting through USB hubs, docks, and adapters when possible.

For desktop computers, connect directly into main I/O panel and avoid connecting into USB ports located elsewhere on the computer's chassis.
 


Main I/O panel of a Windows desktop PC

About USB Host Controllers

On legacy or older host systems, connect using a USB host controller that complies with Intel xHCI 1.1 specification or higher. 

USB host controllers made by Intel and AMD* are commonly found on Windows PCs, and can be used with UA USB devices.

* USB host controllers made by AMD on early AM4 platforms (eg. B350 & B450) may have limited compatibility, in which case PCIe to USB 3 Expansion Cards can be considered. This is not known to affect other AM4 and AM5 systems. 

To identify the USB host controllers of your PC, search and open System Information using the Start menu.

The Components > USB section of the report will show USB host controller information.

Notes: Some PCs will have multiple USB host controllers from different manufacturers. To identify which USB host controllers are used with the physical ports of the PC, refer to the product documentation or contact the manufacturer for qualified help.

PCIe to USB 3 Expansion Cards

PCIe to USB 3 expansion cards can offer improved connectivity for desktop computers with an available PCIe slot. 

The PCIe to USB 3 expansion cards listed below have performed well with UA devices in testing.

USB Connection Status Error

The USB Connection Status Error will appear only for Apollo USB and Satellite USB devices when connecting with an incompatible cable or port.

Double check the steps in this article to ensure the device is connected properly and the appropriate cable is being used. 

Connecting Apollo or Satellite using a USB 2.0 port, USB 2.0 cable, or into a port that uses an incompatible USB host controller will also generate this error message. 

Articles in this section

See more